Wall sawing
A track-mounted saw cuts straight, square openings through concrete and block, ready for frames and lintels.
- Door and window openings
- Lift shafts and service openings
- Lowering or removing walls
Cut depthup to 730 mm
Gorey, Co. Wexford and the South East
Concrete cutting and core drilling, done right first time
Wall sawing, floor sawing, core drilling and controlled demolition for homes, farms and contractors. Owner-operated, with a fixed price and a fixed day.
Most quotes back within one working day.
Owner-operated
You deal with Ronan from quote to finish
Wet cutting
Water suppression keeps silica dust down
Out-of-hours
Evenings and weekends for live sites
Any size of job
From one core hole to full openings
Concrete cutting services
Diamond cutting leaves a clean, accurate edge without the vibration and cracking of breaking concrete by hand. Each service shows the typical limit, so you can see what fits your job.
Floor and road sawing
Walk-behind saws for slabs, yards, roads and footpaths. Straight cuts for trenches, drains and joints.
- Drainage and service trenches
- Expansion and control joints
- Tarmac and asphalt reinstatement
Cut depthup to 400 mm
Core drilling
Round holes drilled clean through walls and floors for pipes, ducts and cables, with no damage around them.
- Soil pipes, flues and extract fans
- Electrical and data ducting
- Angled and overhead coring
Hole size12 to 500 mm
Wire sawing
A diamond wire loops around the section to cut heavily reinforced or very thick concrete a blade cannot reach.
- Beams, columns and bridge decks
- Thick foundations and plinths
- Low-vibration removal
Cut depthno practical limit
Controlled demolition
Cut, lift and break out concrete in a planned order, so the rest of the structure stays sound.
- Slab and stair removal
- Breaking out bases and footings
- Strip-out for renovations
Methodcut, lift, break
Chasing and hand sawing
Hand-held and ring saws for tight spaces, plus wall chasing for cables and pipes in concrete and block.
- Wall chasing for electrics
- Cutting in confined spaces
- Kerbs, steps and lintels
Cut depthup to 260 mm
Typical figures. The final method and depth are confirmed after seeing the job.
Will it cut?
Pick the job and enter the size. You will see which method suits it and how it compares with the typical limit.
How a job runs
Smaller jobs can often be priced from photos alone, so you are not waiting on a site visit.
-
Step 1
Send the details
Use the quote form or ring. Photos, the thickness and a rough size help a lot.
-
Step 2
Get a fixed price
Priced from photos or a site visit, with a clear written quote and no surprises.
-
Step 3
Cutting day
On site at the agreed time. The area is protected and cut wet to keep dust down.
-
Step 4
Left clean
Slurry cleaned up, and cut sections lifted out or stacked, as agreed.
Recent work
Roads, renovations and extensions across Wexford and the surrounding counties.
Stock photos from Unsplash, shown until project photos are added.
About Ronan O'Toole
I'm Ronan, and I run a one-man concrete cutting business from Gorey. When you ring, you talk to me. When the quote is accepted, I'm the one who turns up and does the cutting.
I started out on sites around Wexford and Wicklow and saw how often a job was held up waiting on a cutting contractor. I set up on my own to give builders, farmers and homeowners someone local they can rely on: a clear price, a fixed day, and a clean job.
I cut for extensions and renovations, farm sheds and slatted units, shop fit-outs, and main contractors who need openings made without fuss.
Ronan O'TooleOwner and operator
Areas covered
Working across north Wexford and south Wicklow every week, and further afield for larger jobs.
Wexford
- Gorey (base)
- Courtown
- Ballycanew
- Camolin
- Ferns
- Enniscorthy
- Wexford town
Wicklow
- Arklow
- Inch
- Carnew
- Tinahely
- Aughrim
- Wicklow town
Further afield
- Bunclody
- New Ross
- Carlow
- Kilkenny
Not listed? Ask anyway.
Common questions
Anything else, send a message or ring 087 054 1555.
Can you price the job without a site visit?
Often, yes. For smaller jobs like core holes or a single opening, photos plus the thickness and rough size are usually enough for a fixed price. Larger or awkward jobs get a site visit first.
Do I need an engineer to cut an opening in a load-bearing wall?
Yes. Openings in load-bearing walls are cut to your engineer's design, with propping in place before cutting starts. If you do not have an engineer yet, ask and I can tell you what they will need to know.
How much dust and mess will there be?
Very little dust. Cutting is done wet, or with on-tool extraction, to keep silica dust down. The water leaves a slurry, which is cleaned up before I leave, and the area is protected first.
Can you work evenings or weekends?
Yes, by arrangement. Out-of-hours cutting suits shops, offices and live sites where noise needs to be kept away from working hours.
What happens to the cut concrete?
Cut sections can be lifted out and stacked on site, or broken out ready for removal. This is agreed in the quote, so you know what to expect on the day.
Request a free quote
Choose the service, fill in the details and add a few photos if you can. I will come back with a price, usually within one working day.
- Phone087 054 1555
- EmailToolerae86@yahoo.com
- Based inGorey, Co. Wexford, covering the South East